Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- Do not use the appliance to vacuum up water or any other type of liquid.
- Do not use the appliance if the on/off switch does not work.
- Use the appliance handle/s, to catch it or move it.
- Do not force the appliance's work capacity.
- Respect the MX level indication.
- Disconnect the appliance from the mains when not in use, before cleaning,
making any adjustment, battery charge or accessory change.
- This appliance is for household use only, not professional or industrial use.
- This appliance can be used by people unused to its handling, disabled people
or children aged from 8 years and above if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand the
hazards involved.
- Cleaning and user maintenance shall not be made by children unless they
are supervised
- This appliance is not a toy. Children should be supervised to ensure that they
do not play with the appliance.
- This appliance should be stored out of reach of children and/or the disabled.
- Keep the appliance in a dry, dust-free place, out of direct sunlight.
- Make sure that dust, dirt or other foreign objects do not block the fan grill on
the appliance.
- Use this appliance, its accessories and tools in accordance with these ins-
tructions, taking into account the working conditions and the work to be done.
Using the appliance for operations other than those it is intended for may cause
a dangerous situation.
- Do not operate over areas which contain metal objects such as nails and/
or screws.
- Never vacuum hot or sharp objects (cigarette butts, ash, nails, etc.).
- Any misuse or failure to follow the instructions for use renders the guarantee
and the manufacturer's liability null and void.
Instructions for use
Before use:
- Remove the appliance's protective film.
- Make sure that all the product's packaging has been removed.
- To eliminate the smell given off by the appliance when used for the first time, it
is recommended to have it on at full power for 2 hours in a well-ventilated room.
- Prepare the appliance according to the function you wish to use.
Vacuuming function:
- Fit the hose unit to the vacuum cleaner's air intake.
- To disconnect the hose unit from the vacuum cleaner, press the two buttons
on the hose joint at the same time and pull outwards (Fig. 1)
Insertion of accessories into the appliance's grip:
- The appliance's grip is designed in such a way that it allows the insertion of
the following accessories:
- Extendable extension tube: Designed to provide access to surfaces which are
out of reach and make floor cleaning comfortable, its length can be adjusted by
using the adjustment control.
- Vacuum cleaner base: Specially designed for cleaning floors (both rugs,
carpets and hard floors), its base has a retractable brush that can be adjusted
to two heights for greater efficiency on these floors.
It is advisable to have the brush out for hard floors and the brush in for rugs
and carpets.
- Vacuum cleaner base for delicate floors: Specially designed for delicate floors,
such as parquet wooden flooring.
- Lance: Specially designed for getting into cracks and difficult corners.
- Multi-use brush (built into the lance):
- Upholstery brush: Especially suitable for cleaning textile surfaces.
Use:
- Take the length of cable required out of the housing.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
- Select the desired speed.
Electronic power control:
- The power of the appliance can be regulated by using the power regulator
control. This function is very useful, as it makes it possible to adapt the power of
the appliance to the type of work that needs to be done.
Once you have finished using the appliance:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance to the mains.
- Retract the cable by pressing the roller cable button and guide the cable into
the appliance.
- Clean the appliance.
Cord housing
This appliance has a cable compartment situated on its posterior.
Carry handle/s:
- The device has a handle on the upper part so it can be transported easily and
comfortably (Fig. 2).
Parking position:
- This appliance has two parking positions for comfortable and straightforward
storage.
- To make use of the vertical parking put the appliance in a vertical position
(so that the back part of the appliance is now leaning against the floor) secure
the hook of the head to the hook which can be found on the lower part of the
appliance (Fig. 3)
- To use the horizontal parking position, fix the break pad hook to the hook
situated on the rear side of the appliance (Fig. 4)
Safety thermal protector:
- The appliance has a safety device, which protects the appliance from
overheating.
- If the appliance turns itself off and does not switch itself on again, disconnect it
from the mains supply, and wait for approximately 15 minutes before reconnec-
ting. If the machine does not start again seek authorised technical assistance.
Cleaning
Disconnect the appliance from the mains and let it cool before undertaking any
cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- Do not submerge the appliance in water or any other liquid, or place it under
a running tap.
Emptying the dust box:
- Empty the vacuum deposit when dust is visible though the transparent walls,
when it is full, or when the vacuum cleaner does not work to its full potential.
- Disconnect the hose from the vacuum cleaner's air intake. (Fig 1).
- Disconnect the dust box from the appliance.
- Open the lid of the dust box and empty the contents into the appropriate waste
disposal receptacle.
- Check the condition of the motor filter.
- Close the lid of the dust box.
- Attach the dust box to the appliance.
- Connect the hose to the vacuum cleaner's air intake.
Changing the filters:
- Motor filter, it is advisable to be changed at least once a year or every 100
hours of the appliance's use.
- Motor filter, it is advisable to be changed at least once a year or every 100
hours of the appliance's use.
- To remove filters:
- The filter motor can be found in the motor's turbine air entrance.
- Remove the filter from its housing.
- To reassemble the filter, proceed with the above instructions, in reverse order.
Supplies
- Always use original supplies, designed specifically for your appliance model.
Anomalies and repair
- Take the appliance to an authorised technical support service if problems
arise. Do not try to dismantle or repair without assistance, as this may be
dangerous.
- If the connection to the mains has been damaged, it must be replaced and you
should proceed as you would in the case of damage.
For EU product versions and/or in case that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included in
a collection, classification and recycling system. Should you wish to dispose of
them, use the appropriate public recycling bins for each type of material.
The product does not contain concentrations of substances that could be
considered harmful to the environment
This symbol means that in case you wish to dispose of the product
once its working life has ended, take it to an authorised waste
agent for the selective collection of waste electrical and electronic
equipment (WEEE)
This appliance complies with Directive 2006/95/EC on Low Voltage and Directi-
ve 2004/108/EC on Electromagnetic Compatibility.
Werbung
