Specifications; Optional Accessories - Sony RVP-511DJS Bedienungsanleitung

Specifications

Optical characteristics
Projection system 3 picture tubes, 3 lenses, Horizontal
inline system, Rear projection type
Picture tube 7-inch monochrome tubes, with
coolant sealed (5.5-inch raster size)
Projection lens F1.1/77mm
Projected picture size
50 inches measured diagonally
Luminance RVP-511DS/511DMS with the
VPS-511RF screen:
ANSI (cd/m
Peak 285 ft-L (977 cd/m
Light output ANSI lumen
110 lm
General
Power requirements
RVP-511DS: 120V AC, 2.8 A,
50/60Hz
RVP-511DMS: 220 – 240V AC,
1.4 A, 50/60Hz
Power consumption
300 W
Operating temperature
5°C to 40°C
Operating humidity
30% to 85%
Approx. 1018.2 × 781 × 1236 mm
Dimensions
(w/h/d)
(40 1
Mass Approx. 88 kg (194 lb)
Accessories supplied
Power cord (1)
SIRCS cord 1.2 m (47
Operating Instructions (1)
Design and specifications are subject to change
without notice.
......................................................................................................................................................................................
1) 2
ANSI lumen and cd/m are measuring methods of American
National Standard IT 7.215.
2 1) 2
) 125 cd/m
2
)
1)
× 30 × 48
/ 3 / 3 / inches)
8 4 4
1 / in.) (1)
4

Optional accessories

Rear screen
VPS-511R (diffuser panels L and F without frame)
VPS-511RF (with frame, 1.7 mm seam)
VPS-515RF (with frame, 0.2 mm seam)
System control kit PWK-411D
(including the remote control unit RM-PJ1292)
Base stand PWR-B511A
Dual position beam PWR-P512A
Triple position beam PWR-P513A
Video input board PWB-411D
Remote control receiver RM-PJ10
RS-422 connecting cable RCC-1W2 (1.2 m)
EN
7