Machine Specifications; Assembly Parts List #1 - Clarke American Sanders B2 Bedienungshandbuch

revised 5/10
Introduction and Machine Specifications
The B-2 is specifically designed for finishing floor edges, stairs, and other hard-to-reach surfaces. The handle
location and low center of gravity make the B-2 easy to operate.
The excellent cutting power comes from a powerful universal type motor. A motor that delivers maximum
performance without slowing down or overheating. Its exclusive two speed control when switched to hi-speed
produces 3200 rpm for fast, rough sanding. At low speed, the B-2 operates at 2800 rpm for fine, finish sanding.
A non marking disc guard protects the rubber pad, permitting the edger to work right up to the baseboard or wall.
Comfortable Operating
Handles
Aluminum Alloy Casting
Balanced Sanding Disc
for perfectly matched job
Specifications
Voltage/Frequency
Amperage
Motor
Sound Level
Vibration
Abrasive Size
Disc Rate High
Disc Rate Low
Gears
Bearings
Dust Collector
Power Cord
Dimensions
Weight
Shipping Weight
Clarke ®
American Sanders
Powerful Universal Motor
Hardened Steel Alloy
Pinon and Drive Gear
110V-120V /50-60 Hz
13.0
1450W (1 HP)
91dB (A)
5.7 m/s rms
2
178mm x 22 mm Dia. (7" x 7/8" Dia.)
3200 RPM
2800 RPM
Hardened steel alloy pinion
and drive gear.
Sealed ball bearings,
lifetime lubricated.
Powerful vacuum fan, full
aluminum skirt
12m H07RN F3G 1.5mm
2
356 x 260 x 343mm (14 x 10½ x 13½) 356 x 260 x 343mm (14 x 10½ x 13½)
14.5 kg (32 lbs)
21 kg (46 lbs)
Operator's Manual (EN) - B2
ENGLISH
High Low Switch
Non-Marking Swivel Type
Casters
Powerful Vacuum Fan for effecient dust pickup
Non-Marking Roller Guard
220V-240 /50-60 Hz
6.5
1450W (1 HP)
91dB (A)
5.7 m/s rms
2
178mm x 22 mm Dia. (7" x 7/8" Dia.)
3200 RPM
2800 RPM
Hardened steel alloy pinion
and drive gear.
Sealed ball bearings,
lifetime lubricated.
Powerful vacuum fan, full
aluminum skirt
12m H07RN F3G 1.5mm
14.5 kg (32 lbs)
21 kg (46 lbs)
EN
2
FORM NO. 79001C - 5 -