Listening To The Radio - New One AR260 Benutzerhandbuch

LISTENING TO THE RADIO

Selecting band
In tuner mode, repeatedly press BND button to select bands in following order: FM1
Manual/automatic tuning
- Manual Tuning
Press and hold or button 2 second, then press
downward or upward. Press and hold or
Note: it will return to automatic tuning mode if no key is pressed within 2 seconds.
- Automatic Tuning
Press or button once, the radio automatically searches a station upward or downward
respectively and plays when it finds a station. Press
Scanning and memorizing stations
- By AMS button
In tuner mode, press and hold AMS button for 3 seconds to start scanning for stations and store them
automatically in memory. All preset stations are scrolled during few seconds.
- By number button 1- 6
1. Tune to a station by or button in FM1.
2. Press and hold one of the 1- 6 number buttons for 2 seconds until display shows "F1P1", which
indicates that station is stored in the corresponding number button.
3. Under radio mode, press 1- 6 number buttons to listen to stored stations.
4. When you are listening to a station stored on a number button, press and hold another number
button for more than 2 seconds to store the station on this number button.
Note:
- The unit can be stored up to 6 stations for each band.
- Same procedure applies for FM2 and FM3.
LISTENING TO USB/ MICRO SD
To insert an USB device (not included)
To insert an USB device (not included) connect your USB device to the USB port, the set will switch
to "USB" mode automatically. If USB has already been inserted, press MOD button to switch to USB
mode.
To insert a Micro SD card (not included)
Insert your micro SD card in the card slot, the set will switch to "SD" mode automatically. If a card has
already been inserted, press MOD button to switch to card mode.
AR-3837 IB NEWO 001 REV0.indd 8
FM2
or continuously to select a station
button to tune the station with a faster speed.
or buttons again to stop scanning.
GB - 5
BASIC PLAYER FUNCTIONS
Play/pause:
FM3. Press the button to pause playback. Press again to resume playback.
Skip/fast search:
1. Press to skip forward to next track.
2. Press to skip backward to previous track.
3. Press and hold or to search quickly within a track.
4. Press -10 or +10 to skip to 10 tracks backward or forward.
Intro scan:
Press INT button to play first 10 seconds of each track and "INT" appears on display. Press again to
cancel intro playback and "INT" disappears.
Repeat:
To repeat the track currently playing, press the RPT button once. The repeat indicator will light up and
stay lit. To repeat all tracks in the entire album/folder, press the RPT button twice. The repeat indicator
will flash. To repeat all tracks, press RPT button again. The repeat indictor will turn off.
Random playback:
Press RDM button to play all files in random order, and "RDM" appears on display. Press again to
cancel this function and "RDM" disappears.
Note:
- The total number of MP3 files on the USB device and Micro SD card should not exceed 9999.
- The device may not contain more than 99 directories.
- The reading time takes about a few seconds or more depending on the amount of MP3 files and
folders on USB device and Micro SD card.
- Do not put anything other than a USB device to the port of this unit. Other objects may damage the
USB mechanism.
- Do not put anything other than a micro SD card to micro SD card slot of this unit. Other objects may
damage the card mechanism.
- The USB socket must not be connected to the computer directly, for that may damage the unit.
- There are many USB devices and micro card in the market. We cannot guarantee to support all
different models. Please try another USB device and micro SD card if your device is not supported.
- The unit might not support all the multimedia files stored in USB or micro SD card because it includes
some special playback procedure which might not be compatible with the procedure of this unit.
LISTENING TO AUXILIARY SOURCE
1. Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack.
2. Press PWR button to turn the unit on.
3. Press MOD to select AUX mode.
4. Start playback from your auxiliary source.
5. Adjust the volume to desired level.
6. Disconnect your auxiliary source from the Aux in jack, press MOD button to select other source.
GB - 6
2016/11/4 14:16:23