Location Of Controls; Basic Operations; Sound Features - New One AR260 Benutzerhandbuch

LOCATION OF CONTROLS

1. PWR/ MOD button: To turn unit on/ off; To select function mode
2. Volume, select, enter knob
3. CLK (Clock) button: To set clock time
4. : Skip forward
5. LCD display
6. AUX IN jack
7. USB port
8. : Skip backward
9. BND/ AMS: Band button (To select band: FM1, FM2, FM3); Automatic storing
10. RESET button
11. MUTE button: To mute or restore sound
12. 1/ button: To select preset channel 1 in radio mode; To start or pause playback.
13. 2/ INT button: To select preset channel 2 in radio mode; To start/ cancel intro playback.
14. 3/ RPT button: To select preset channel 3 in radio mode; To repeat playback.
15. 4/ RDM button: To select preset channel 4 in radio mode; To start/ cancel random playback.
16. 5/ -10 button: To select preset channel 5 in radio mode; To skip backward 10 tracks (mp3 only)
17. 6/ +10 button: To select preset channel 6 in radio mode; To skip forward 10 tracks (mp3 only)
18. Micro SD card slot
AR-3837 IB NEWO 001 REV0.indd 7
GB - 3

BASIC OPERATIONS

Turning on/off the unit
Press PWR button to turn on the unit. Press and hold this button again to turn off the unit.
Selecting the mode
When the unit is on, press MOD button repeatedly to select different source mode:
TUNER USB CARD AUX.
Note: USB, CARD mode can not be selected if no such source was plugged in the unit.
Current time display
Press CLK button to display the current time when unit is ON.
Adjust time:
1. Press and hold CLK button to enter into setting mode. The hour digits will flash.
2. Rotate volume knob anti-clockwise and clockwise to adjust the hour value. Press this button again
to confirm the hour value.
3. The minute digits will flash, rotate volume knob anti-clockwise and clockwise to adjust the minute
value.
Noted: It will confirm your setting if no key is pressed within 5 seconds.
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. To set the
unit to initial status, press RESET button on the front panel with a pointed object. When some errors
occur in display, you can also reset the unit, but it will erase the clock setting and some memorized
functions.

SOUND FEATURES

Volume adjusting:
To increase or decrease the sound level, rotate volume knob clockwise or anti-clockwise.
Muting the sound
When the unit is ON, press MUTE to mute the sound. Press again to restore.
Using volume knob to select sound feature
Repeatedly press volume knob to select the desired mode for sound setting in the following order:
"BAS"(BASS) "TRE" (Treble) "BAL" (Balance)
OFF.
After selecting the desired mode, you can adjust the level by rotating the volume knob.
Switching Loudness On/off
By this function, you can increase the low frequency, which can improve sound sensitivity.
"FAD" (Fader) EQ LOUD ON/
GB - 4
2016/11/4 14:16:23