Listening To The Radio - New One AR375BT Benutzerhandbuch

Switching Loudness On/off
By this function, you can increase the low frequency, which can improve sound sensitivity.
Note:
Please refer to "LISTENING TO THE RADIO" for others items operation.

LISTENING TO THE RADIO

Selecting band
In tuner mode, repeatedly press BND button to select bands in following order: FM1
Manual/automatic tuning
- Manual Tuning
Press and hold or button until "MANUAL" shows on display, then press
continuously to select a station downward or upward. Press and hold
station with a faster speed.
Note: it will return to automatic tuning mode if no key is pressed within 5 seconds. "AUTO" will shows
on display 2 seconds.
- Automatic Tuning
Press or button once, the radio automatically searches a station upward or downward
respectively and plays when it finds a station. Press
Scanning and memorizing stations
- By AMS button
In tuner mode, press and hold AMS button for 3 seconds to start scanning for stations and store them
automatically in memory. All preset stations are scrolled during few seconds.
- By number button 1- 6
1. Tune to a station by or button.
2. Press and hold one of the 1- 6 number buttons for 2 seconds until display shows the corresponding
number, which indicates that station is stored in the corresponding number button.
3. Under radio mode, press 1- 6 number buttons to listen to stored stations.
4. When you are listening to a station stored on a number button, press and hold another number
button for more than 2 seconds to store the station on this number button.
Note: The unit can be stored up to 6 stations for each band.
- DX / LOCAL (DISTANCE/ LOCAL)
DX: When you select "DX", both distance and local stations can be received.
LOCAL: When you select "LOC", only local station is available.
- STEREO/MONO
Repeatedly press SEL/ VOL knob to select "STEREO/ MONO" mode. FM listening is generally done
in Stereo mode. However, if the signal is weak or reception is not as good as you would like, switching
to Mono mode usually improves the overall sound quality.
- AREA (EUROPE/AMERICA)
To select different area.
AR-3838A IB NEWO 001 REV2.indd 9
FM2
or
or button to tune the
or buttons again to stop scanning.
GB - 5
LISTENING TO USB/ MICRO SD
To insert an USB device (not included)
To insert an USB device (not included) connect your USB device to the USB port, the set will switch
to "USB" mode automatically. If USB has already been inserted, press MOD button to switch to USB
mode.
To insert a Micro SD card (not included)
Insert your micro SD card in the card slot, the set will switch to "SD" mode automatically. If a card has
already been inserted, press MOD button to switch to card mode.
FM3.
BASIC PLAYER FUNCTIONS
Play/pause:
Press the button to pause playback. Press again to resume playback.
Skip/fast search:
1. Press to skip forward to next track.
2. Press to skip backward to previous track.
3. Press and hold or to search quickly within a track.
4. Press -10 or +10 to skip to 10 tracks backward or forward.
5. Long press -10 or +10 to select previous folder or next folder in MP3 mode.
Intro scan:
Repeatly press INT button to select intro playback mode:
INT ON: to play first 10 seconds of each song.
INT OFF: to cancel intro playback.
Repeat:
Press RPT button repeatedly to select a play mode: RPT ONE, RPT DIR, RPT OFF.
Random playback:
Press RDM button to play all files in random order, and "RDM ON" appears on display. Press again to
cancel this function and "RDM OFF" appears.
Searching a track in USB/ Micro SD:
Press and hold AMS button, the display will show "NUM 0000", then rotate volume knob to select the
track number, press SEL button to start playback.
Note:
- The total number of MP3 files on the USB device and Micro SD card should not exceed 9999.
- The device may not contain more than 99 directories.
- The reading time takes about a few seconds or more depending on the amount of MP3 files and
folders on USB device and Micro SD card.
- Do not put anything other than a USB device to the port of this unit. Other objects may damage the
USB mechanism.
- Do not put anything other than a micro SD card to micro SD card slot of this unit. Other objects may
damage the card mechanism.
- The USB socket must not be connected to the computer directly, for that may damage the unit.
- There are many USB devices and micro card in the market. We cannot guarantee to support all
different models. Please try another USB device and micro SD card if your device is not supported.
- The unit might not support all the multimedia files stored in USB or micro SD card because it includes
some special playback procedure which might not be compatible with the procedure of this unit.
GB - 6
2021/3/5 13:46:48