Klarstein 10034253 Handbuch Seite 16

EN
16
Eco mode
Press the Power/Mode button (c) until the ECO light illuminates. In Eco mode, the
heating output adjusts automatically when the room temperature approaches the set
temperature.
Example: The set temperature is 25 °C. If the room temperature is lower than 22 °C,
the heating operates at high output. If the room temperature rises to 23 °C, the heating
operates at medium output. If the room temperature rises to 24 °C, the heating operates
at low output. When the room temperature reaches the set temperature, the heating
switches off automatically. As soon as the room temperature drops again, the heating
switches on again automatically.
Note: If no temperature is set, the default temperature is 23 °C.
Thermostat setting (Eco model only)
Note: The temperature can be adjusted between 10-30 °C.
1. Press the Power/Mode button (c) until the ECO light illuminates.
2. Press the thermostat button (a), the temperature display will flash.
3. Use the [+] and [-] buttons to set the desired temperature.
4. The temperature display stops flashing and the current room temperature is
displayed.
5. The heater maintains the room temperature by switching on and off again and
again.
Switching off the unit
Press the standby button (f) until the unit switches to standby mode and the display turns
off. Then press the Standby button again to completely turn off the unit and unplug it
from the wall outlet.