Seite 1
Montage- und Trainingsanleitung „APOLLO” Art.–Nr. 07426-700 150 cm 85 cm 226 cm max. 110 kg 10-11 45 Min. 12-13 14-15 16-17 18-19 20-21 22-23 24-25 26-27 28-29 30-31 Abb. ähnlich...
Extensive repairs must Nobody may be in the moving range of a training person du- only be carried out by KETTLER service staff or qualified per- ring training sonnel trained by KETTLER.
When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the pro- KETTLER products are recyclable. At the end of its useful life please duct (see handling). dispose of this article correctly and safely (local refuse sites).
Messhilfe für Verschraubungsmaterial – P – Auxiliar de medição para materiais de aparafusamento – GB – Measuring help for screw connections – DK – Hjælp til måling af skruer – F – Gabarit pour système de serrae – RO – Ajutor pentru măsurarea materialului de înşurubat –...
Seite 5
Checkliste (Packungsinhalt) – GB – Checklist (contents of packaging) – P – Lista de verificação (conteúdo da embalagem) – F – Liste de vérification (contenu de l’emballage) – DK – Checkliste (pakkens indhold) – NL – Checklijst (verpakkingsinhoud) – RO – Lista de verificare (conţinutul pachetului) –...
Seite 7
ø8x41 SW10 M6x50 ø12,5x6,4 M6 M6x45 ø12,5x6,4 M6 – D – Achten Sie beim Einsetzen der Fußbügel auf die dargestellte – D – Die Schraubverbindung noch nicht fest anziehen. richtige Lage der Fuß- bzw. Anschlagstopfen. – GB – Do not tighten the bolts yet. –...
Seite 8
20x20 M8x30 ø25x8,4 ø13x12 M5x10 ø15,5x5,3 ø21x10,5 M8x30 ø16x8,3 M = 10 Nm SW13 M8x85 ø16x8,3 M8...
Seite 10
M8x25 ø16x8,3 M5x45 – D – Beim Eindrehen der Schrauben keinen Druck ausüben, da die Gefahr besteht, dass sich die innenliegenden Muttern lockern. – GB – When screwing the bolts in, do not use force as this may dislodge the nuts on the inside. –...
Even if the unit is designed for use by one person, assistance from civilization. a second person may be useful. Before you use the APOLLO, have a check-up by your doctor to ensure you are fit enough to do the It is therefore essential to take early action to prevent such com- exercises.
Einstellen und Auspendeln des APOLLO Einstellung in ganze Stufen Einstellung in halben Stufen – GB – Adjustment in whole increments – GB – Adjustment in half increments. – F – Réglage en étapes complètes. – F – Réglage en demie étapes.
Seite 14
Rasterverstellung (Bild 5), die den maximalen Neigungswinkel des Sitz des Stellkörpers. Tasten Sie sich auf diese Weise langsam an Pendels begrenzt. Stellen Sie vor dem Training mit dem APOLLO Ihren Idealpunkt heran und markieren oder merken Sie sich diesen den gewünschten maximalen Neigungswinkel ein. Es stehen sechs Punkt (Rasterloch).
Ersatzteilbestellung – GB – Spare parts order – F – Commande de pièces de rechange – NL – Bestelling van reserveonderdelen – E – Pedido de recambios – I – Ordine di pezzi di ricambio – PL – Zamówiene części zamiennych –...