AEG dvd 4612 hc Bedienungsanleitung Seite 57

Selecting fi le/directory and
starting replay
DVD4612HC_GB.indd 57 DVD4612HC_GB.indd 57
NOTE:
• In order to fi nd out which fi les can be played back the DVD player
now reads the contents of the storage medium. In the case of large
storage media this procedure may take a long time.
• If you have also connected an output device to the CARD con-
nection, its contents are shown fi rst. Press the USB/CARD button
(Fig. 3/24) a second time to show the contents of the USB storage
medium.
• The fi le mode can only be selected if the device is in DVD mode.
3. Select the desired fi le(s) and start playback ➯ Page 57, „Selecting fi le/
directory and starting playback".
4. If you would like to return to DVD mode, press the USB/CARD button
(Fig. 3/24) again.
Media may contain numerous data/fi les and directories. You must therefore
fi rst determine the data to be played.
1. Place the CD or DVD in the drive if you have not already done so.
2. A two-column menu window appears in which the directories (if there are
any directories present) or the fi les are listed on the left.
3. Use the Cursor buttons (Fig. 3/10) to select the desired directory of fi le in
the left-hand list.
4. Select this by pressing the „ENTER" button (Fig. 3/30).
File: Once you have selected a fi le, this is now displayed directly or played
back.
Directory: If you have called up a directory, a list of fi les now opens.
Here too you can select the desired fi le with the Cursor buttons and the
ENTER button (Fig. 3/30). If you have selected a fi le, this is now displayed or
played back.
NOTE:
If for example the „Edit mode" option has been selected, the background of
the keypad changes to light blue.
Please note:
There are both lots of burning and compressing methods as well as high
quality differences in CDs/DVDs and burned CDs/DVDs.
For this reason there may occasionally be problems when fi les are played
back (for example fi les are displayed but cannot be played back). This is no
malfunction of the player.
NOTE:
In order to return from the fi les to the folders, select the „
(higher-level folder) and press the ENTER key (Fig. 3/30).
In the upper right-hand list the following options are available:
Working in fi le mode
.." symbol
57
14.09.2007 14:45:11 Uhr 14.09.2007 14:45:11 Uhr