Set Up My Eq Profile; Loudness; Aux In Socket - perfect pro ROCKMATE-2 Bedienungsanleitung

Set up My EQ profile

. Press and hold the Volume/ Tone control until your radio beeps and your radio enters to the
EQ setting menu.
. Rotate the Volume/ Tone control to select "My Setting". Then press the Volume/Tone control
to enter the setting.
. Rotate the Volume/ Tone control to select your required Bass level (-5 and +5). Then press the
Volume/Tone control to enter Treble level setting.
4. Rotate the Volume/ Tone control to select your required Treble level (-5 and +5). Then press
the Volume/Tone control to confirm the setting.
Loudness On/Off
Press the Loudness button to get compensation on lower and higher frequency. The effect will
be more audible when the radio is in lower volume level. Display will show Loudness ON when
Loudness function is applied.
Note: Default is Loudness ON

Aux In Socket

There is a Aux In socket on this radio to connect external audio sources like a MP player to the
speakers of this radio. The Aux In socket is located on the side of the radio. Remove the rubber
cover and connect the audio source with a .5 mm stereo audio cable.
When radio is on, repeatedly press and release SOURCE button to select AUX-IN, rotate the
volume control to play the audio program.
Please always close rubber cover (AUX-in) on the side of the radio when AUX input socket is not
in use. This is to prevent moist and dust from entering the radio. This will also enhance overall
sound quality.
GB