Vicon VM614-2 Bedienungsanleitung Seite 17

1) VM614-2 E 11/15/00 10:40 AM Page e-15
Using Manual Mode
To select a channel for CAMERA input manually, press the AUTO
button to light green :
Pressing each of camera switches functions as :
Button Function
CAMERA1 To convert to Manual mode Channel1
CAMERA2 To convert to Manual mode Channel2
CAMERA3 To convert to Manual mode Channel3
CAMERA4 To convert to Manual mode Channel4
OSD (On Screen Display)
1. When pressing a CAMERA button in MANUAL mode, the following is
displayed in the monitor screen:
Ex) When CAMERA1 button is pressed,
CA1 NTSC/PAL
Power on
2. Pressing any no input CAMERA button shows the following OSD.
Ex) When no input CAMERA2 button is pressed,
CA2
Power on
No Input
CA1
After 20sec
e-15