Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Technical Specifications; Electrical Wiring - CombiSteel 7450.0745 Gebrauchsanweisung

Dessert show display
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

TROUBLESHOOTING

If your appliance develops a fault, please check the following table before making a call to your retailer.
Fault
The unit is not switched on
Plug and lead are damaged
The appliance is
Fuse in the plug has blown
not working
Power supply
Internal wiring fault
Condenser blocked with dust
Doors are not shut properly
Appliance is located near a heat source
The appliance
or air flow to the condenser is being
turns on, but the
interrupted
temperature is
Ambient temperature is too high
too high/low
Insufficient airflow to the fans
Appliance is overloaded
Factory default parameters adjusted
The appliance is touching a neighbouring
The appliance is
object
unusually loud
The appliance has not been installed in a
level or stable position

TECHNICAL SPECIFICATIONS

Model
Voltage
7450.0745
230V 50Hz
7450.0750
230V 50Hz

ELECTRICAL WIRING

Appliances are supplied with a 3 pin, moulded, BS1363 plug and lead, with a 3 amp fuse as standard. The plug is
to be connected to a suitable mains socket. Appliances are wired as follows:
Live wire (coloured brown) to terminal marked L
Neutral wire (coloured blue) to terminal marked N
Earth wire (coloured green/yellow) to terminal marked E
All appliances must be earthed, using a dedicated earthing circuit. If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection
being required they must be readily accessible.
Probable Cause
Temperature
Power
Current
range
160W
1.1A
2°C - 8°C
315W
1.9A
2°C - 8°C
Action
Check the unit is plugged in correctly and
switched on
Call your agent or qualified technician
Replace the fuse
Check power supply
Call your agent or qualified technician
Call your agent or qualified technician
Check if doors/drawers are shut and seals are
not damaged
Move the refrigerator to a more suitable
location
Increase ventilation or move appliance to a
cooler position
Remove any blockages to the fan
Reduce the amount of food stored in the
appliance
Call your agent or qualified technician
Check installation position and change if
necessary
Check installation position and change if
necessary
Capacity
Refrigerant
(litres)
268
R134a 180g
468
R134a 200g
Dimensions
Weight
HxWxD (mm)
(kg)
706 x 706 x 1300
130
706 x 706 x 1800
180
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis