Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance; Service Centre; Environmental Protection - Concept KS4000 Bedienungsanleitung

Glaskonvektor
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 32
EN
and current time shows up. At this point, the convector is set in the time mode.
Mode
Fig. 5
Start time and stop time
Fig. 7
CHILD LOCK
Press and hold
and the display will show
. Now the child lock is activated and no operation can be performed.
To remove the child lock, press and hold the button again
REMOTE CONTROL AND CONTROL PANEL:
1. SET
P, W, S three modes to select and set the current week.
2. MODE 24H Timer in the S mode
3.
Child lock.
4.
Setting the heating power output.
+
5.
For setting time and increasing temperature.
-
6.
For setting time and decreasing temperature.
TEMPERATURE
When the appliance is switched on, the current temperature is shown on the display. If the appliance is in the
standby or heating mode, the temperature can be set. When the room temperature reaches the desired level, the
high temperature power output is interrupted and low power output is activated. When the room temperature gets
2 degrees higher than the set temperature, the appliance stops working completely. The appliance starts operating
again when the temperature gets 2 degrees lower than the set temperature. Mismatch of the shown temperature and
the actual room temperature by ≤ 4 degrees.
60
Weekly mode
Fig. 6
.
KS4000/KS4010

CLEANING AND MAINTENANCE

Always unplug the power cord from the socket before cleaning.
Make sure the appliance has cooled down properly before handling or moving.
To clean the surface of the appliance, use only a damp cloth, no detergents or hard objects, as they can damage the
surface of the appliance!
Clean and inspect the input and output grilles of the appliance regularly to ensure good operation of the appliance
and prevent overheating.
The dust in the appliance can be blown out or vacuumed.
Never clean the appliance under running water, do not rinse it or immerse it in water or any liquid!

SERVICE CENTRE

Extensive maintenance or repair, which requires access to internal parts of the product, has to be performed by
a qualified service centre.

ENVIRONMENTAL PROTECTION

• Prefer recycling of packaging materials and old appliances.
• Packaging materials may be disposed of as sorted waste.
• Dispose the plastic bags made of polyethylene (PE) of as sorted waste.
Recycling of the appliance at the end of its lifespan
This appliance is labelled in accordance with European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The symbol
on the product or its packaging indicates that this product may not be treated as household waste. It
is necessary to take it to a container park for the recycling of electrical and electronic equipment. By
ensuring the correct disposal of this appliance you will help prevent potential negative consequences
to the environment and human health, which could otherwise result from inappropriate disposal of
this product. Disposal must be performed in accordance to the regulations for waste disposal. For
more detailed information about recycling of this appliance see the authorized local office or service
for household waste disposal or the shop, where you purchased the appliance.
The product meets all the necessary requirements of the EU directives applicable to the specific
product.
Changes in text, design, and technical specifications are subject to change without notice and we reserve the right to
change them.
KS4000/KS4010
EN
61

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ks4010

Inhaltsverzeichnis