Product Features - Concept KS4000 Bedienungsanleitung

EN EN

PRODUCT FEATURES

1. Stylish black glass panel.
2. High-quality aluminium heater: faster heating with better energy savings.
3. Touch screen display and remote control.
4. Timer from 1 to 24 hours to turn the convector heater on or off at the desired time.
5. Digital display automatically showing the room temperature.
6. Free-standing or wall-mounted option.
INSTALLATION (When used on the floor as a portable appliance)
Place the legs on the convector body and fasten them with 12x4 mm supplied screws (8 pieces).
WALL MOUNTING (When using a convector as a mounted appliance)
Please note that the convector must be installed at least 15 cm off the floor and 50 cm off the ceiling.
1. Remove the holder from the body as shown in Figure 1.
2. Drill holes into the wall on both sides and then insert plastic wall plugs into the holes. Fasten the bracket in the wall
with a screw, see Figure 2.
3. Place the convector in a suitable position so that the holes are aligned with the bracket.
4. Tighten the screw on the top of the bracket.
56 KS4000/KS4010 KS4000/KS4010 57