Electrical Connections - Faro IBIZA Handbuch

Inhaltsverzeichnis

Verfügbare Sprachen

instrucciones de seguridad / instruction de sécurité / safety instructions / instruções de segurança / sicherheitshinweise / veiligheidsinsturcties /

PREPARATION:

Verify you have all parts before beginning the installation. Check foam insert closely for missing parts. Remove motor from packing.

To avoid damage to finish, assemble motor on soft padded surface or use the original foam inset in motor box.

Do not lay fan on its side as this could result in shifting of motor in decorative enclosure.

CAUTION:

To avoid possible electrical shock, be sure electricity is turned off at the main power box before

writing. All wiring must be in accordance with National and Local Electrical

Codes and the ceiling fan must be grounded as a precaution against possible electric shock.

HANGER BRACKET INSTALLATION

1- Secure the hanger bracket to the ceiling outlet box using screws provided with the outlet box and flat washers included with the

fan (fig 1).

Note: optional wood screws are provided for mounting of hanger bracket directly to building structure.

2- Remove the two screws / washer out from the mounting bracket. Screws the rest two screw out. Match the slots of the canopy to

the two screws one the mounting rack. Twist clockwise the canopy until they reach the ends of the slots.

3- Use the wood screws to fix the canopy to the rack

Rubber

Washer

Hanger bracket

Spring

Washer

Screws

INSTALLING THE FAN

This method is prefered if the ceiling is sloped or valuated, or if ceiling is extra high

BLADE ATTACHMENT