Unpacking, Handling And Installation Instructions - FIMAR FRY1/L Benutz Und Wartungsanleitung

GENERAL AND SAFETY INFORMATION
– Identification plate showing the gas features and the code of the country where the equip-
ment is used.
Equipment model
Serial number
Technical specifications
EN

UNPACKING, HANDLING AND INSTALLATION INSTRUCTIONS

– The appliance is delivered packaged in a specific container and, if necessary, suitably
stabilised with shockproof material to ensure its integrity.
– Packaging may be on a pallet according to appliance features, destination and transport
means to facilitate handling.
– All information required for handling (loading and unloading) in safe conditions is indicat-
ed directly on the packaging.
– The package must be handled according to its specifications (weight, dimensions, etc.).
For limited dimensions and weights, the package may be handled manually. Otherwise,
use a lifting device with suitable capacity.
– Upon receiving the appliance, make sure all components are integral. In the event of
damages or missing parts, contact your local dealer to arrange for future procedures.
– Installation must be performed by expert and authorised personnel who must previously
ensure that the electrical mains meet specific current laws, regulations and standards in
effect in the country of use.
– Before installing the appliance, make sure the selected site is suitable, sufficiently venti-
lated and lit, stable and with surrounding areas sufficient for easy cleaning and mainte-
nance. Also make sure the support surface is stable, level and easy to clean to avoid the
risk of dirt accumulations and food product contamination.
Manufacturer identification CE markings
- 6 -
Manufacturing year
IDM-34600900100
English language