Velleman projects VMB1BL Bedienungsanleitung Seite 5

The outputs will be deactivated and the UP or DOWN operation LED will blink rapidly to indicate the learning mode.
The LEDs of the push buttons saved in the non-volatile memory will blink rapidly as well. You can easily detect which push
buttons have been learned for the UP or DOWN control. Add a specific push button by maintaining it pressed until the output
activates.
Releasing the push button will deactivate the output while the indication LED of the push button blinks rapidly as confirmation.
You can not add any more push buttons when the maximum number of push buttons has been reached.
A learned push button can be deleted by maintaining it pressed. Releasing it will turn off the indication LED of the push button.
Delete all learned push buttons of a control group by maintaining pressed the manual control on the blind control module until
the output switches on. Releasing the manual control push button will deactivate the output and turn off the indication LEDs of
each corresponding push button.
Exit the learning mode by resetting the address of the blind control module at the original value.
5