Niko 350-30010 Handbuch Seite 13

350-30010 350-20011
390-20010
Read the complete manual before attempting installation
and activating the system.
1. DESCRIPTION
The motion sensors 350-30010 and 350-20011 are used in combi-
nation with a daylight control module (360-35010, 360-45010,
360-45011) for lighting control. They have a detection angle of max.
90° and operate according to the Passive Infra Red (PIR) technology.
- Motion sensor 350-30010 with built-in light sensor
For use outdoors.
Areas of application: gardens, car parks...
- Motion sensor 350-20011 without built-in light sensor
For use indoors.
For use in warehouses and racks (fig.1b)
Accessories
IP54 cap: 390-20010
2. INSTALLATION
2.1. Location
The motion sensors respond to heat and differences in movement in
relation to the surroundings. The motion sensors are most sensitive
for movements perpendicular to the detection beams (fig.1a,b & 2a,b).
Avoid locating the motion sensor close to 'heat sources': cookers, electric
radiators, ventilation systems... as this can result in undesirable activation
of the motion sensors (fig.3). In case of outdoor installation, the sensor
has to be fitted with a protective (IP54) cap (390-20010) (fig.4). Bear in
mind that partitions, glass, plants, furniture ... block the 'beams' (fig.5a,b).
EN 13