Connect To The Network - HP 6222 Einrichtungshandbuch

9

Connect to the network

a Highlight the name of your network from the list that appears and then press OK .
(If your network is not listed, select Enter a New Network Name (SSID) and enter your
Network Name (SSID). Make sure there are no obstructions between the access point
and your HP Wireless Dock Base.)
b If your network is encrypted, a prompt appears for the WEP key or WPA passphrase.
Enter the information using the remote control and the keyboard that appears on your
television. See Display keyboard tips at the bottom of this page.
c Follow the prompts on the display. If the connection is successful, go to the next step.
Display keyboard tips:
To Select: Use Arrow keys to highlight, and then press OK .
For uppercase: Select ABC
For punctuation: Select Symbols
When you are fi nished: Highlight Done , and then press OK .
d If your Workgroup name is not MSHOME, you will need to select Workgroup and
change the name to match your network.