General Guidelines - Velleman PSSE10 Bedienungsanleitung

Keep this device away from extreme heat.
Protect this device from shocks and abuse. Avoid brute
force when operating the device.
Do not use the device when damage to housing or cables
is noticed. Do not attempt to service the device yourself
but contact an authorised dealer.
3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last
pages of this manual.
 Familiarise yourself with the functions of the device before actually
using it.
 All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
 Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this
information sheet is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
 Make sure the electronic device for which the adapter will be used
is technically compliant and compatible with the adapter.
 Velleman will not be held responsible for damaged or lost software
or damage to a connected device. Before connecting a device you
should make sure that both the voltage and polarity are correct.
Do not change either voltage or polarity during operation. Contact
your local dealer when in doubt.
4. Operation
1. Set the voltage selector switch in accordance with the voltage
requirement of your electronic device.
2. Verify the mA requirement of the unit and determine if it can be
used with this adapter.
V. 02 – 09/03/2017
PSSE10
3 ©Velleman nv