Operation; Power On/Off; Video Recording - Wiseup TP100 Benutzerhandbuch

2. Product Accessories
USB Cable

3. Operation

>> Please make sure your camera is fully charged before using.
>> Camera is fully charged when the indicator light is solid red.

1) POWER ON/OFF

(1) Hold down the Power On/Off Button for 3 seconds, the camera will be
turned on and enter into standby mode automatically. The indicator light will be
solid red.
(2) Power off the camera by holding down the Power On/Off Button for 3
seconds, the camera will be turned off. The red light indicator will turn off.

2) VIDEO RECORDING

(1) Power on the camera by holding down the Power On/Off Button for 3
seconds and the camera will enter into standby mode automatically.
(2) Press and hold the Video/Camera Button for 2 seconds, the camera will
start video recording. The red indicator light will flash 2 times then turn off.
(3) To stop video recording, press the Video/Camera Button again and the
camera will enter into standby mode. The indicator light will be solid red.
(4) Press and hold the Video/Camera Button for 2 seconds to resume video
recording.
Attention:
The camera will save recorded files automatically every 10 minutes.

The camera will stop recording automatically when the memory card is full.

Video format: avi

Video resolution: 720x480

3) CAMERA/STILL PHOTOGRAPHY
(1) Power on the camera by holding down the Power On/Off Button for 3
seconds and the camera will enter into standby mode automatically.
(2) From standby mode, the indicator light will be illuminated red, which will
allow you to begin taking photos.
(3) Press the Video/Camera Button once to take a photo. The red light
indicator will flash every time you take a photo.