Bluetooth ® Pairing - Hama Soundcup-L Bedienungsanleitung

• Charge the speaker fully before using it for the first time.
• Connect the included Micro-USB charging cable to the speaker's Micro-USB port (3).
• Connect the unused connector on the Micro-USB charging cable to a suitable USB
charger. Please refer to the operating instructions for the USB charger used.
Note – Charging
• It takes approx. 4 – 5 hours to completely charge the product.
• The speaker's battery can be charged whether the speaker is on or off.
• If the battery capacity is less than 10%, the speaker will emit two acoustic
signals. You will only receive this information if the speaker is on.
• The actual battery life varies depending on use of the device, the settings and the
ambient conditions (rechargeable batteries have a limited service life).
4.3 Audio playback via the included audio cable (3.5 mm jack)
• Ensure that the speaker is switched off.
• Connect your mobile terminal device (MP3 player, smartphone, etc.) and the AUX
input (2) of the speaker using the included 3.5 mm audio cable.
• Set the volume on your terminal device to a low level.
• Switch on the speakers as described in 4.1, Switching the product on and off.
The status LED (4) is now green.
• Start and control audio playback on the connected terminal device accordingly.
• Turn the rotary control to the left or right to increase or decrease the volume.
Note
Please note that you cannot establish the Bluetooth
4.4 and 4.5 if an audio cable is connected.
4.4 Bluetooth
®
Note
• Check whether your mobile device (MP3 player, mobile phone, etc.) is
Bluetooth
capable.
®
• If not, you can only use the speaker for playback using the included audio cable.
• Note that the maximum range for Bluetooth
such as walls, people, etc.
12
pairing
connection described under
®
is 10 metres without obstacles
®