Hama Soundcup-L Bedienungsanleitung Seite 16

4.9 True Wireless Stereo – connecting two Hama Cubes for stereo sound
• Switch on both speakers as described in 4.1 Switching the product on and off .
Note – Master
• The speaker that is switched on first will be the master.
• If you are only using one speaker, it is automatically the master.
• Afterwards, push and hold the sound-mode-button (7) on both speakers, until
you hear an acoustic signal. Then both speakers will connect with each other
automatically.
• Establish a Bluetooth
• Position the speaker that is the master to your left. Position the second speaker to
your right.
5. Care and Maintenance
• Only clean this product with a slightly damp, lint-free cloth and do not use
aggressive cleaning agents.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage
resulting from improper installation/mounting, improper use of the product or from
failure to observe the operating instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here: www.hama.com
8. Technical Data
Mobile Bluetooth
Bluetooth
Technology
®
Supported profiles
Frequency for the
Bluetooth
transfers
®
Bluetooth
transfers power
®
Frequency
Range
Maximum number of paired
devices
Max. music output
connection to one of the speakers with your terminal device.
®
Speaker Soundcup-L
®
Bluetooth
A2DP V1.2, AVRCP V1.4, HFP V1.5
2400 – 2483.5 MHz
4 dBm
180 Hz – 20 kHz
< 10 m
8
24 W
v4.1
®
15