Atag One zone Schnellstartanleitung Seite 15

5. ACCOUNT REGISTRATION
• Before starting the Wi-Fi configuration proce-
dure, check that ATAG zone service is avail-
able in your country and that your internet
connection is on-line.
• Download the ATAG zone app from the Store.
Open the app and register your account by
entering the requested information.
• Click on the link in the welcome email to acti-
vate the new account.
WARNING! ATAG zone supports the following
Wi-Fi security protocols: WEP, WPA/WPA2 Personal
6. CONNECTING TO THE INTERNET AND REGISTER-
ING THE PRODUCT
1. After you have installed the product, switch
on the heating system. ATAG One zone turns
on and the display reads "Select language";
follow the guided basic configuration proce-
dure until you are prompted to configure the
Wi-Fi network.
2. If you have not configured the Wi-Fi connec-
tion during the first startup, go to the "Connec-
tivity" menu, select "Wi-Fi ON/OFF" and then
select "ON". The connectivity menu will dis-
play the new menu option "network configu-
ration"; select this and follow the instructions.
Connectivity
Wi-Fi ON/OFF
Connectivity information
Reconfiguration
Wi-Fi signal level
Internet time
Press to confirm
EN / 15