Hardware Installation - Belkin SuperSpeed Benutzerhandbuch

InSTallaTIon
seCTions
1 2 3 4
Table of Contents

Hardware Installation

1. Locate your computer's ExpressCard slot.
2. Insert the ExpressCard into the slot. Apply pressure as needed until the Card is fully seated.
3 The ExpressCard will be detected and hardware will be installed automatically Installation is now complete
note: Depending on the speed of your computer, it may take up to 30–60 seconds for the ExpressCard to be detected.
The installation procedure is now complete
5
SuperSpeed USB 3.0 2-Port ExpressCard™