Cleaning And Maintenance - Hoover HH74DBXP Gebrauchs- Und Installationsanweisungen

Boiling Function:
8
8
After a heater has been selected, to activate Boiling function:
- Select Boiling key
A tone sounds and heater display shows "P"
The heater will work at maximum power level for 10 minutes.
After these 10 minutes a tone sounds heater will return to level "9"
P ause f nction u
8
8 8
8
The Pause function allows temporary pausing of the cooking process,
allowing the users to answer the door or the telephone without
worrying that the water is boiling over. This function is also useful to
clean the user interface surface without changing the cooking set up.
To select this functio , the user should touch "timer +/- keys" together.
If the "timer +/- keys" are touched for ½ seconds :
A beep sounds and the cooktop is stopped,
The heaters actual power setting is stored and all the active heaters
power is set to power level 0,
The heaters auto-swich off time is paused,
All the timers running count downs are paused,
All keys are locked except "timer +/- keys" and "on/off key" (Timer keys
can only be active if they are used together to deactivate pause
function),
Timer displays nothing, and all the heaters displays are getting on and
puting out "0", switching on segment by segment in left direction, and
after that switching off segment by segment in right direction,
continously.
The stop function will finish:
if the "timer +/- keys" (together) are touched for more than ½ second a
beep sounds and the heaters actual power setting and timer
countdowns are restored, or if the cooktop is stopped for more than 10
minutes the cooktop is switched off automatically.
Overflow security
Something (an object or a liquid) is pressing any key during more than
5s. 2 Short Beep + 1 Long beep every 30s while the key is pressed.
Cook-top will turn Off. This symbol will maintain blinking while the
matter persist.
Timer
To activate timer, heater must be selected and its power level must
be greater than "0";
Select the zone to be timed. Power level of the zone greater than 0.
Static is displayed in the zone being timed . "0 0" in the digits
reserved for the timer.
1) With "+" or "-" keys, timer time can be chosen. No Beeps at time
change.
2) Pressing simultaneously timer "+/-" keys the timer is cancelled
(goes to 00).
3) If timer "+" or "-" keys is maintained pressed during TBD time, there
is quick setting.
4) When setting timer time, it is possible to go from "00" to "99" with "-"
key, and from "99" to "00" with "+" key.
5) Maximum time 99 minutes.
6) When the time is elapsed and the hob is beeping, press any key and
the alarm and digit sequence will end.
8
8
8
8
08 GB
7) It is possible to adjust the timer time while the timer is previously
running.
8) Power of timed zone can be modified without consequences on the
timer programming.
9) Last minute will be displayed by seconds (For Variants only visible if
we enter the timer programming while the last minute of the
countdown)
10) Pressing the Timer key without any selected zone and when no
zone is being timed, does nothing.
11) Pressing the Timer key without any selected zone and when many
zones are being timed, the time shown in time digits changes in a
rotatory way, and shows the time whose power display has the
decimal point ON.
12) Alternatively Power (5s) and (0,5s) is displayed in the zone being
timed.
Remaining time is displayed in the digits reserved for the timer. If
multiple zones are timed, the smallest remaining time is displayed,
and the decimal point is displayed in the corresponding zone.
Residual Heat Indicator (In radiant heaters-> calculated)
The same indicators can be used for "residual heat" indication as well.
A time table must be defined on this purpose: Rest Heat time=f (power
level, working time).
While a temperature on the cook top glass surface is above
o
65 Cb(theory value), this condition will be shown in the associated
display, by means of an "H".
To generate a temperature above 65 C a heating element has to be in
operation for certain time, this time depends on the power level. Once
this time has expired, the residual heat warning will be shown when
the heating element is switched off.
Automatic Safety Off
If the power level is not changed during a preset time, the
corresponding heater turns off automatically.
The maximum time a heater can stay on, depends on the selected
cooking level.
Power level
1
2
3
4
5
6
7
8
9
NOTE: while an overheating situation should occur during the
operation of the highest power levels, the Hob control will
automatically adjust the power level in order to protect the hob from
overheating.

7. CLEANING AND MAINTENANCE

. Before carrying out any maintenance work on the hob, allow it to
cool down.
. Only products, (creams and scrapers) specifically designed for
aglass ceramic surfaces should be used. They are obtainable from
hardware stores.
. Avoid spillages, as anything which falls on to the hob surface will
quickly burn and will make cleaning more difficult.
. It is advisable to keep away from the hob all substances which are
liable to melt, such as plastic items, sugar, or sugar-based products.
.MAINTENANCE:
- Place a few drops of the specialised cleaning product on the hob
surface.
- Rub any stubborn stains with a soft cloth or with slightly damp
kitchen paper.
- Wipe with a soft cloth or dry kitchen paper until the surface is clean.
If there are still some stubborn stains:
- Place a few more drops of specialised cleaning fluid on the surface.
- Scrape with a scraper, holding it at an angle of 30° to the hob, until
the stains disappear.
- Wipe with a soft cloth or dry kitchen paper until the surface is clean.
- Repeat the operation if necessary.
o
Max. time on (hours)
10
5
5
4
3
2
2
2
2