Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
■
BNC jacks A/B
For connecting the supplied antennas.
■
Mixed output
Output of the master signal of the four receiving units (6.3
mm jack, unbal.) for connection to a line input of a mixer
or amplifier.
■
POWER IN jack
Plug in the supplied 13 V, 500 mA power unit here.
■
Charging contact
For charging, place the microphone with the internal rech.
battery into a charging compartment of the charging
station.
■
▲/▼ buttons
To adjust the values in the main menu.
■ LCD
Indicates the transmission channel or the frequency, the
RF level, the sensitivity and the battery charging status.
■
Channel outputs
3-pin, balanced XLR outputs for the output signal from
the respective receiving unit. For connection to two
balanced microphone inputs of a mixer or amplifier.
■
On/Off/Set button
Keep this button pressed for approx. 2 seconds to turn
the microphone on and off. This button also serves for
activating the main menu for adjusting the transmission
channel and frequency, the RF level, the sensitivity and
the lock mode.
18/24
00031676.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
