Philips HR1040 Bedienungsanleitung Seite 21

Problem Possible cause
The appliance The heating plate and/or pot
produces some are not completely clean.
smoke.
The appliance may produce
some smoke when you use
it for the first time.
The stirrer blocks. You put too many
ingredients in the pot.
During roasting a piece
of meat got stuck on the
bottom of the pot.
The message 'Err' An error has occurred.
appears on the
display.
The display shows This is possible.
°C, but I want to
work with °F.
Solution
Make sure you clean the heating plate and the pot
properly after each use.
It is normal for a new product to produce an
unpleasant smell or emit some smoke when it
is first used.This is because new electric motors
have a safety lacquering on the motor windings,
which emit this unpleasant smell or even smoke,
when they get warm during the first uses. This
phenomenon stops after you have used the
appliance a few times.
Remove the ingredients and give the stirrer a light
push. Do not overload the pot.
Give the stirrer a slight push.
Have the appliance checked by a service centre
authorised by Philips.
Press the temperature increase and decrease
button at the same time for 3 seconds to switch
from °C to °F and back again.
EnglisH
21