Operator Control; Switching On / Off; Channel Change (Programme Change); Volume And Sound Settings - Cinemateq VQF 42HD Benutzerhandbuch

Operator control

Operator control

Switching on / off

Remote
Control
Indication on operation (Power On) (blue)

Channel change (programme change)

Channel information

Volume and sound settings

12
Indication when on standby (orange)
IR sensor for remote control
S
To switch on the Plasma TV press the [POWER]
button on the remote control or the button
MENU on the set.
The indicator Power On / Standby lights up blue on the
Plasma TV.
S
To switch off the Plasma TV press the [POWER]
button on the remote control.
The indicator Power On / Standby lights up orange on
the Plasma TV.
If a signal is pending at any input, the Plasma TV is
switched automatically to standby mode after a waiting
period.
S
Select TV mode by pressing the [TV] button on the
remote control.
With the buttons [P ] / [P
Y B
S
Press the button [P ] to increase the channel num-
Y
ber.
S Press the button [P ] to reduce the channel
B
number.
With the buttons [0...9] on the remote control:
Select the channel number directly by pressing the
buttons [0...9].
With the channel overview in the OSD menu:
S Press the button [LIST] on the remote control to dis-
play the channel overview on the display.
S Select a channel with the buttons [
the remote control.
S Press the red button to close the channel overview.
With the buttons [VOL ] / [
"
control:
S Press the button [VOL
"
S
Press the button [ VOL] to reduce the volume.
A
/
] on the remote control:
] on
BY " A
VOL] on the remote
A
] to increase the volume.
ENGLISH