ASROCK H110 Pro BTC+ Bedienungsanleitung Seite 22

Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 8)
(SATA3_1:
see p.1, No. 7)
(SATA3_2:
see p.1, No. 10)
(SATA3_3:
see p.1, No. 9)
SATA Power Connector
(SATA_POW1)
(see p.1, No. 18)
USB 2.0 Header
(9-pin USB_5_6)
(see p.1, No. 14)
USB 3.0 Header
(19-pin USB3_3_4)
(see p.1, No. 15)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.1, No. 20)
20
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
IntA_P_D+
IntA_P_D-
GND
IntA_P_SSTX+
IntA_P_SSTX-
GND
IntA_P_SSRX+
IntA_P_SSRX-
Vbus
1
Vbus
IntA_P_SSRX-
IntA_P_SSRX+
GND
IntA_P_SSTX-
IntA_P_SSTX+
GND
IntA_P_D-
IntA_P_D+
ID
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
If M2_1 is occupied by a
SATA-type M.2 device,
SATA3_0 will be disabled.
Please connect this
connector to the
power supply when
three graphics cards
are installed on this
motherboard.
There is one header on
this motherboard. This
USB 2.0 header can
support two ports.
There is one header on
this motherboard. This
USB 3.0 header can
support two ports.
This header is for
connecting audio devices
to the front audio panel.