Description Of The Components; Identification Data - Zhermack SAB 1000 Handbuch

MAINTENANCE AND USE MANUAL
1. Motor unit
2. Main switch
3. Aspirator intake
4. Motor cage
5. Aspirator body
The equipment described in this manual has an ID platelet giving information about both the
equipment and the manufacturer:
A
Zhermack S.p.A. - via Bovazecchino, 100
45021 Badia Polesine (RO) Italy - Tel. +39 0425 597 611
B
C305608 - SAB 1000
D
230V~50/60Hz 1000W
The equipment is built in compliance with the EC directives listed in the enclosed "EC
declaration of conformity". When requesting spare parts, information or assistance from your
Authorised Servicing Centre always quote the data on the ID plate.
Should the ID plate deteriorate and become illegible, even partially, order a replacement plate from
the manufacturer: remember to quote the relevant data.
Do not remove and/or damage the plate as you must be able to read the data at all
times.
SAB 1000
EN
SN:20000000

Description of the components

6. Aspirating pipe
7. Mains or the sandblaster connection plug
8. Aspirator closure clips
9. Paper bag filter
10. Felt filter to protect motor

IDENTIFICATION DATA

A. Name and address of manufacturer
B. Equipment code and model
C. Serial number
D. Power supply information
C
3.2.1
3.3
91 of 136