Hama 00178221 Bedienungsanleitung Seite 4

3.2 Using the charging plug / Mounting the smartphone
holder
• Select the appropriate rubber insert for your charging plug, place
it in the appropriate opening (note the position) and secure the
insert using the clamping screw (B).
• Secure your charging cable in the rubber insert in order to
charge your smartphone in the holder.
• Press and hold the release buttons on the left and right of the
head of the suction cup holder (C).
• Carefully insert the smartphone holder so that the snap-in hooks
sit securely in the corresponding openings on the underside of
the smartphone holder.
• Let go of the release buttons.
Note
Keep checking that the smartphone holder is securely seated.
• To remove the smartphone holder, press the release buttons
and take it off.
3.3 Inserting and removing terminal devices
• Press the release button of the smartphone holder to open the
holding brackets (D).
• Insert your terminal device and secure it in place by pressing the
holding brackets together (E).
• To remove your terminal device, press the release button on the
smartphone holder to open the holding brackets (D).
4. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the operating
instructions and/or safety notes.
5. Service and Support
Please contact Hama Product Consulting if you have any questions
about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
3