Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Fitting Kit
K559W
Configuration B:
Use the following grubscrew lengths for
Configuration B:
Front = M6 x 50mm (2")
Centre = M6 x 40mm (1 5/8")
Screw grubscrew into adaptor using hex
key. Tighten firmly.
Repeat for all four positions.
CENTRE MOUNTING POINTS ONLY:
Make sure the pad fits into the holes
underneath the foot.
It is important to put the pads in the correct
position on the vehicle.
Place crossbar foot over grubscrews.
10
Werbung
Inhaltsverzeichnis
