Whispbar K559W Fitting Kit Montageanleitung Seite 8

EN
Fitting Kit
K559W
Select four grubscrews and assemble them
into the adaptor using 3 mm (1/8") Hex
Key.
Select grubscrews and screw into the
vehicle's fixed points.
Do not over tighten.
Repeat for all four positions.
If you want your crossbars in positions 1
and 3 as shown, proceed to: Configuration
A.
If you want your crossbars in positions 1
and 2 as shown proceed to: Configuration
B.
8