Whispbar K559W Fitting Kit Montageanleitung Seite 9

EN
Fitting Kit
K559W
If you want your crossbars in positions 2
and 3 as shown, proceed to: Configuration
C.
Configuration A:
Use the following grubscrew lengths for
Configuration A:
Front = M6 x 50mm (2")
Rear = M6 x 60mm (2 3/8")
Screw grubscrew into adaptor using hex
key. Tighten firmly.
Repeat for all four positions.
Place crossbar foot over grubscrews.
Proceed to: All Configurations
9