Operation; How To Operate The Appliance - Fakir 2003 CT Bedienungsanleitung

Operation

How to operate the appliance

10
Operation
1. Thermostat control (1)
With the thermostat control you can set the
required room temperature
When switching on the appliance, first turn
the thermostat control (1) clockwise to the
maximum position
When the required room temperature is
reached, then turn the control slowly back
in an anticlockwise direction until you note
a click
The required room temperature is now set
and the heating appliance is switched off
(pilot lamp(s) are off)
Should the room temperature drop below
the required level, then the appliance is
switched on again automatically
2. To set the heating output
To set the heating output there are three
setting stages:
Switch (3) to set 750 watt operation
Switch (2) to set 1250 watt
Switch (2) and (3) to set 2000 watt
When the individual switching position is set,
then the pilot lamp on the switch is on
3. Fan
The heating appliance is equipped with an
installed fan
The on/off switching of the fan is done by
a switch (4)
When the fan is switched on, then the pilot
lamp on the switch (4) is on
4. Switching off the appliance
To switch off the appliance turn all
switches (2), (3), (4) to the position „Off"
(all pilot lamps are off)