Calorex VARIHEAT VH3 Installationshandbuch Seite 11

2.0 CONSOLE FIXING, VARIHEAT 3 WITH OPTIONAL FEATURES
TOP OUTLET RANGE
AIR OFF
SERVICE
PANEL
OPTIONAL RESISTANCE HEATER
SERVICE PANEL
800.00
SERVICE ACCESS AREA
REQD FOR ALL SERVICE PANELS
% R H ºC ºC
MAX
HUM IDITY AIR T EM P WATER TEM P
AUT O = AUTO
MI N
=
=
A U TO
AIR OFF SERVICE PANEL
CONSOLE FIXING HOLES (3)
The Variheat 3 is designed with interchangable service panels.
On delivery, two console fixing service panels are fitted in the positions shown in the diagrams above. The console
for the Variheat 3 will be inside the Variheat 3 fan box. Attach the console to the Variheat 3 console fixing panel
selected as instructed below.
1. Fix the 3 self tapping screws provided into the 3 holes in the console fixing service panel. (Indicated by a label).
Leave a small gap.
2. The console drops over the screws.
Note: It is best to have the console panel close to the electric box, as once the console is fixed to the Variheat 3
the ribbon cable connector supplied with the Variheat 3 needs to be connected between the console and the
electric box. The connector on the console is at the bottom.
See the sketch on the previous page for instructions on how to rotate the console back panel.
CONSOLE FIXING
PANEL WITH 3
HOLES.
OPTIONAL FRESH AIR
MODULE WITH TWO
SPIGOTS (DIA 225mm)
OR NEGATIVE
PRESSURE BOX WITH
ONE SPIGOT (DIA
157mm)
SPIGOT
DAMPER
AIR ON
SERVICE PANEL
HORIZONTAL RANGE
CONSOLE FIXING HOLES (3)
RESISTANCE HEATER BOX
Page 9
BOTTOM OUTLET RANGE
SERVICE PANEL
OPTIONAL RESISTANCE HEATER
CONSOLE FIXING
PANEL WITH 3
HOLES.
SERVICE PANEL
AIR OFF
ELEC BOX ASSY
SERVICE PANEL
SPIGOT
DAMPER
SERVICE PANEL
AIR ON
OPTIONAL FRESH AIR
MODULE WITH TWO
SPIGOTS OR
NEGATIVE PRESSURE
BOX W ITH ONE SPIGOT
CONSOLE FIXING
PANEL WITH 3
HOLES.
OPTIONAL FRESH AIR
MODULE WITH TWO
SPIGOTS (DIA 225mm)
SPIGOT
OR NEGATIVE
PRESSURE BOX WITH
DAMPER
ONE SPIGOT
(DIA 157mm)
SERVICE PANEL
AIR ON
SD437350 ISSUE 22