Edy EDMO4502 Gebrauchsanweisung Seite 15

the program is running.
We have seen in the example above that the automatic cooking process can be immediately started by
setting the cooking time. By pressing the button "M" three times, you can see and adjust, if necessary,
the time when the food is ready (end of cooking). In the example below, the food in the oven is set to be
ready at 21:30.
1) Pressing the button "M" three times. The 'End' signal and the time when the food is ready will be
shown one after another, 18:30+2:15=20:45.
2) Set the end of cooking time using the
buttons + or -.
In this case, we have programmed our oven so that your food will be ready at 21:30. We have
programmed the cooking time before to 2 hours and 15 minutes. In this case, the oven starts cooking at
19:15 and will cook for 2 hours and 15 minutes and the cooking program will finish at 21:30.
The screen to be displayed when
cooking starts
When the cooking program has finished, the buzzer is activated and it will play for 7 minutes if not
silenced.
1) Turn off the oven.
In the example above, first the cooking time is set and the end of cooking time automatically calculated
Note: The oven will be deactivated until you switch your timing module to
manual mode.
3)In a few seconds, the screen will show the
current time.
The screen to be displayed when cooking finishes
2) Reset the oven time.