Manual Mode; Time Setting - Edy Edmo4502 Gebrauchsanweisung

OVERVIEW
OT-2000-LED-CL-X3FA6X is an electronic timing module that allows your food in the oven to be ready
for service at any time you want. You only need to program the cooking time and the time that you want
your food to be ready.
It can also be used as a minute-programmed alarm clock independent from the oven.
WHEN THE POWER IS SUPPLIED
When the power is first supplied, the oven is deactivated. The time and letter A are flashing on the
screen. The time that seems on the screen is not correct and should be adjusted (see. Time settings). To
set the cooking program, you should first switch to Manual Mode (see. Manual Mode)

MANUAL MODE

1) Press 'MI button to switch to manual
mode.

TIME SETTING:

The time can be set only in a cooking program. First press the keys + and - at the same time and then you
can set the time forward and backward using the keys + and -. A long press on these buttons will change
the time faster.
1) Press + and - at the same time.
Note: If the button - or + is not pressed for 5 seconds, the time setting mode automatically stops. You can
stop the time setting mode immediately by pressing the keys + and - at the same time.
Using the Digital Programmer
or
2) Press the keys + and - at the same time to
switch to manual mode.
2)Set the time using the keys + or -.
11