P Preparing for use
Note: Remove all packaging materials from the product.
Installation
Install the product in accordance with figures A - D.
Make sure that the assembled product is inserted far enough into the
ground (lawn, flower bed) for it to be stable.
Make sure you keep proper footing and balance at all times. Do not
use any force when assembling or setting-up the product, e.g. hammer
blows. This will damage the product.
You can select the following mode by sliding the MODE switch
OFF
The product is switched off.
SOUND mode
The buzzer in the product sends out sound waves for
approx. 5 seconds every 20 seconds.
VIBRATION mode
The product produces vibration for approx. 5 seconds every
20 seconds.
14 GB
:
1