1.4
Electrical connection
Use wires with a cross section of between 2 x 0.75 and 2 x 1.5 mm².
Connect the 2 wires to the terminal block.
To access the connection terminal block in the appliance's
control panel, refer to the instructions for the appliance.
Under no circumstances must sensor cables (very low voltage)
be placed in cable ducts or channels carrying cables supplying
230 V. Furthermore, a minimum distance of 10 cm should be
kept between cables supplying very low voltage and cables
supplying 230 V.
04/03/2015 - 300017411-03
AD244
7