Cognex In-Sight Micro Serie Bedienungsanleitung Seite 10

necessary.
Install Software and Documentation
To configure an In-Sight vision system, In-Sight Explorer software must be installed
on a networked PC.
Log On to the Vision System
1. Open the In-Sight Explorer software. From the Windows Start menu,
select: All Programs > Cognex > In-Sight > In-Sight Explorer x.x.x > In-Sight
Explorer x.x.x.
2. From the Get Connected Application Step, select your In-Sight vision
system from the Select an In-Sight Sensor or Emulator group box and press
the Connect button.
In-Sight Micro Vision System Specifications
Specifications 1020/1050 1100/1110
Operating: 0°C to 45°C (32°F to 113°F)
Temperature
Storage: -30°C to 80°C (-22°F to 176°F)
Humidity 90%, non-condensing (Operating and Storage)
Protection IP51 with cables and lens attached.
Shock 80 G shock with 50 gram or lighter lens attached per IEC 68-2-27 EA.
Vibration 10 G with 50 gram or lighter lens attached 2 hrs/axis (10-500 Hz) per IEC 68-2-6, FC.
1100C 1400/1410 1400C 1402/1412 1403/1413 1403C
9
1500