Electrical Connection - V2 CITY9 Bedienungsanleitung

ELECTRICAL CONNECTION

POWER WORK
1 2 3 4 5 6 7 8 9 10 11 12
m
PLEASE NOTE: If not used, the normally closed
inputs (STOP, PHOTO, EDGE) must be jumpered with the
commands common line COM (-).
If not used, the open limit switch FCA (A) and close limit
switch FCC (B) inputs must be jumpered with the limit
switch common line (D).
L1 Antenna
L2 Antenna shield
L3
Opening command for a standard connection device
with switch normally open
L4
Pedestrian opening command for a standard
connection device with switch normally open
L5 STOP command. N.C. switch
L6
Photocell. N.C. switch
L7
Edge. Switch N.C. or resistive rubber edge
L8
Commands common (-) line
L9 - L10 24 VAC power output for photocells and other
accessories
L10 - L11 Power supply for functional test TX photocell
PAUSE
A B C D
overload
- 10 -
C1 Motor open
C2 Motor common
C3
Motor close
D1 - D2
Courtesy light timer activation switch
D3 - D4 230V - 40W / 120V - 40W blinker
N 230V / 120V power supply - neutral
L 230V / 120V power supply - phase
A Limit switch open. N.C. switch
B Limit switch closed. N.C. switch
C
NOT USED
D
Limit switch common (-) line
mains