Connection Example; Technical Specifications; Key To Symbols; Simplified Eu Declaration Of Conformity - urmet 1083/48 Bedienungsanleitung

Any connected modules which do not respect these constraints will be ignored by the door
unit.

13. CONNECTION EXAMPLE

Rear view of the modules fi xed to the panel frame in tipped position.

14. TECHNICAL SPECIFICATIONS

Power voltage: ..................................................................................................................................36-48 V
Consumption @ 48Vdc:
Standby: .................................................................................................................................... < 10 mAcc
Full rate: .................................................................................................................................... < 250 mAcc
Wires with cross-section area of 0.5 mm
crosssection area smaller than 0.5 mm

15. KEY TO SYMBOLS

Symbol

16. SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, URMET S.p.A. declares that the radio equipment types:
AUDIO VIDEO EXTERNAL UNIT Ref. 1083/48 and EXTERNAL LOUDSPEAKER UNIT Ref. 1083/38
are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.urmet.com
DS1083-098A
or larger must comply with IEC 60332-1-2; wires with
2
must comply with IEC 60332-2-2.
2
Direct input voltage
See the installation manual of the device
6 cm long cord provided with
button module with expansion
unit Ref. 1168/4 and 1168/8
A of the ILA and voice synthesis
module Ref. 1168/48 and of
the door number module Ref.
1168/50.
20 cm cord provided with ILA
B and voice synthesis module
Ref. 1168/48.
38 cm long cord provided
with two-module frame Ref.
1168/62 and
with two-module frame Ref.
1168/312.
C
58 cm long cord provided with
three or four-module frame
Ref. 1168/63 or 1168/64) and
of one-row casings with three
or four-module frame (Ref.
1168/313 or 1168/314).
Description
with casing
15