Installation - Mac - LaCie SATA II ExpressCard 34 Schnellstartanleitung

Installation – Mac
1. Insert the Drivers & Utilities CD-ROM
into your computer's CD-ROM drive.
2. Launch the installer tool on the CD (the *.pkg file) and follow the
installation steps.
3. Insert the controller card into an empty
ExpressCard/34 or 54mm slot and use
an eSATA, USB, or eSATA-USB 2-in-1
cable (not included) to connect an
external SATA/SATA II, USB 2.0, or
eSATA-USB 2-in-1 device.
Protect your investment – register for free technical support: www.lacie.com/register