Installation - Windows - LaCie SATA II ExpressCard 34 Schnellstartanleitung

Installation – Windows
1. Insert the Drivers & Utilities CD-ROM
into your computer's CD-ROM drive.
2. Insert the controller card into an empty
ExpressCard/34 or 54mm slot.
3. When the card is detected, install the driver from the Drivers &
Utilities CD-ROM.
4. Use an eSATA, USB or eSATA-USB 2-in-1 cable (not included) to
connect an external SATA/SATA II, USB 2.0, or eSATA-USB 2-in-1 device.
Protect your investment – register for free technical support: www.lacie.com/register