Inhaltsverzeichnis
Werbung
4. Wi-Fi and Internet Setup
4.1 Connect the device to a Wi-Fi network
You can set up a dedicated email address for your frame, which makes it possible for the
device to receive pictures directly from email. To receive pictures, the device must be
connected to the Internet through a Wi-Fi gateway.
Here is how to connect your photo frame to a local Wi-Fi network:
1. Access the Main Menu (If you are playing a slideshow press the MENU button twice
slowly)
2. Scroll to CHANGE SETTINGS and press "
3. Scroll to Wi-Fi and press "
to discover available wireless networks
4. Using the UP and DOWN keys to navigate the interface and select the Wi-Fi network
you want to connect to
5. Press the
If the network security is enabled, the device will automatically pop up a window where you
can enter the security key. All other parameters are AUTOMATICALLY configured by your Pix-
Star frame.
After you enter the security key in the interface using the virtual keyboard, press CONFIRM
then press JOIN, it will start the Wi-Fi connection process.
Note 1: A DHCP server must be running on your network in order to automatically assign an IP
address to your device. Most personal Wi-Fi networks run a DHCP server.
Note 2: Connection to Public Hotspots or to a network that requires an authentication with
user name and password through a web page (HTML) or that requires to accept some terms and
conditions to access internet are NOT supported by this product as there is no web browser in
the device. If you use a router with a "guest" access that uses this web page authentication
mode please connect to the "main" access instead.
". The device will automatically start a scanning process
button to connect to the selected network
" to enter it
Werbung
Inhaltsverzeichnis
