Troubleshooting - De Dietrich DOE3910 Einbau- Und Wartungsanleitung

4 / TROUBLESHOOTING

Problems &
Solutions
If you have a doubt about the correct functioning of your oven, this does not necessarily mean that
there is a malfunction. In any event, check the following items:
You observe that:
The oven is not heating.
The oven light is not
working.
Your oven starts beeping.
The cooling fan continues
to operate after the oven
stops.
Warning
Repairs to your appliance should only be made by a professional. Non-standard repairs
may be a source of danger for the user. In all circumstances, if you cannot deal with a
problem yourself, contact the after-sales service department without delay.
Possible causes:
- The oven is not connected to
the power supply.
- Your fuse is out of order.
- The selected temperature is
too low.
- "DEMO" mode is active.
- The light is out of order.
- The oven is not connected or
the fuse is not working.
- During cooking.
- At the end of a cooking cycle.
- The fan should work for a
maximum of one hour after
cooking, or when the oven
temperature is greater than
125°C.
- If it does not stop after 1
hour
50
What should you do?
- Connect the oven.
- Replace the fuse in your electrical
set-up and check its capacity (16A).
- Increase the selected temperature.
- Exit "DEMO" mode.
- Replace the bulb.
- Connect the oven or replace the
fuse.
- The temperature recommended for
your choice has been reached.
- Your programmed cooking cycle is
finished.
- Open the oven door to cool down
the oven faster.
- Call the After-Sales Service
Department.
EN