Disassembling Of The Door Glasses; Replacing The Oven Lamp - De Dietrich DOE3910 Einbau- Und Wartungsanleitung

3 / CARING FOR AND CLEANING YOUR APPLIANCE

Disassembling of the door glasses

ATTENTION: for your safety, before removing the glasses you should
remove the oven door.
To facilitate the cleaning, after having removed the door from the oven, you
can proceed with the disassembly of the glass. Release the two upper
blocks (picture C) so that the glass can be removed (picture D). After
the cleaning you should reassemble the glass, replace the blocks and
lock into position. Check that all components have been assembled correctly
and than you can re-assemble the door onto the oven.
All the glasses used in this appliance has undergone a special safety treatment.
Please never
subject the glasses to thermal shock, for example never clean
the glass when it is hot.

REPLACING THE OVEN LAMP

• •
Once the oven has been electrically disconnected, unscrew the
glass protection cap and the bulb, replacing it with another one sui-
table for high temperatures (300°C / E14). Reassemble the glass
cap and reconnect the oven.
Tip
To unscrew the view port and the light,
use a rubber glove, which will make
disassembly easier.
Please keep the OK symbol below on the right.
C
49
EN
D