AB myPilot Gebrauchsanweisung Seite 11

implanted children. They would only need one AB myPilot to have remote control access for
everyone.
The pairing process must be activated by the recipient and the Naída CI must be put in a pairing
state. The system is intentionally designed this way to ensure that a Naída CI's settings cannot
be changed by an unpaired AB myPilot. Naída CI setting changes are therefore deliberate and
done by either the recipient or the recipient's caregiver.
The AB myPilot must be paired to the Naída CI during the first five minutes of the Naída CI
starting up. This time period is referred to as the Pairing Window and it begins as soon as the
PowerCel, Zn-Air Battery Pak, or Power Adapter is attached to the Naída CI.
After the five-minute Pairing Window closes, pairing is no longer possible. If you attempt to
pair after the Pairing Window closes, no Naída CIs will be listed in the Pairing Window. If the
Pairing Window is still open and the Naída CI is merely out of range, the 'Closer - Try Again'
message will appear on the screen. If no Naída CIs are listed and there is no 'Closer - Try
Again' message, the Pairing Window has likely closed. To reopen the window, remove and then
reattach the Naída CI battery.
Sound input to the Naída CI is not affected during this period. If pairing is not desired, the
recipient can proceed with normal use of the Naída CI.
Scan for Devices
If you first received the AB myPilot at a hearing professional's office, they may have paired
the AB myPilot to the Naída CI during your visit. If you received the AB myPilot directly from
Advanced Bionics, it will need to be paired to the Naída CI.
Pairing must be completed before the AB myPilot will interact with the Naída CI.
10
AB myPilot User Guide
To begin the pairing process, have the Naída CI
you want to pair within 12" (30 cm) of the AB
myPilot. Attach the PowerCel, Zn-Air Battery
Pak, or power adapter to the Naída CI,
commencing the Pairing Window (five minute
time out). If the AB myPilot has never been
paired, upon turning it on, the AB myPilot
screen will read: 'The AB myPilot needs to be
paired with your hearing instruments.'